A basic rule to go by is that the tongue weight of a 5th wheel trailer is about 20 percent of the gross trailer weight. Based on the 5th wheel trailer dry weight of 13,400 pounds the dry hitch weight is correct at 2,535 pounds. Just under the 20 percent of the 5th wheel dry weight or precisely 18.9 percent.
The tongue weight of the 5th wheel trailer at 20 percent is 2,680 pounds based on a dry weight of 13,400 pounds.
So as long as you keep your tongue weight at 3,000 pounds or below... view full answer...
On the Redline Trailer Wheel Stud, part # 25-51, both of the ends are 1/2-inch thread size. The end that screws into the hub is a coarse thread (UNC) with a thread pitch of 1/2-inch x 13 threads per inch.
The other end that is used for the lug nut is a fine thread (UNF) that has a thread pitch of 1/2 inch x 20 threads per inch. view full answer...
Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole to hole and from the tip of the receiver opening to the furthest point towards the front of the truck is 28 inches.
The one measurement that is different is from the bottom of the receiver tube to the top of the brackets where it mounts to the truck.... view full answer...
The Short rail on the Signature Series Fifth Wheel Hitch Installation Kit, item # 30061, is 42 inches and the long rail length is 43-3/8 inches. view full answer...
If your truck and hitched camper are level after you have installed your Husky Center Line Weight Distribution hitch # HT32218 then it sounds like you did the install correctly.
If you need more clearance between the trailer coupler and the truck you can switch out the weight distribution shank to a longer one such as the Pro Series # RP63971 which is 14-inches long. The shanks for these systems can be interchanged since they are all standardized. All shanks that we offer appear on the... view full answer...
The weight capacity of the Rightline Gear Air Mattress # RL110M10 and # RL110M60 is 460 lbs.
I have added a link to a video review of this air mattress for you to take a look at as well. view full answer...